LocostBuilders - powered by XMB

Blade 893 and Acumen DG8

j-k - 7/4/09 at 09:11 PM

Anyone managed to set one up and get it working.?

I have got a seperate hall effect speedo sensor looking at the prop bolts and this seems to work ok. However I think its the Revs input that is giving me problems.

If anyone has this setup, what wire did you connect to in the loom?

Many thanks

jon

YQUSTA - 7/4/09 at 09:34 PM

if you give Acumen a call they will find the wire you need if no one else gets it first.

Andy B - 7/4/09 at 09:50 PM

the dedicated rpm wire on the 893 ecu is the yellow with green trace
regards
Andy

Hellfire - 7/4/09 at 11:06 PM

I know of not one person who has got any GI to work with this engine successfully

Steve

Hellfire - 7/4/09 at 11:07 PM

I know of not one person who has got any GI to work with this engine successfully

Steve

j-k - 8/4/09 at 04:42 AM

quote:
Originally posted by Hellfire
I know of not one person who has got any GI to work with this engine successfully

Steve

Is there a particular reason for this?