im trying to make a pivot point to join two rods from my paddleshift
has anyone got any idea's or suggestions
pictures would be ideal,
here are some really poor piccys






the distance between the rods (side to side) is 50mm
front to rear is 50mm and the rod from the padles should sit 80mm above the piece of alu in the second pic
thank you

[Edited on 20/5/09 by eccsmk]

Is this any good for you?


Edit. The same picture is larger if you look in my pictures archive.

[Edited on 20/5/09 by pgtips]

thats absolutely spot on!!!!
why didnt i just move it all forward like that DOH!

thank you very much

ive managed to get my mock up linkage working and its pretty good
i connected the paddles up on their own for a start then added my gear lever back in
a few pics to show whats been done








all i have to do now is made some better looking rods etc but im going to do a bit more testing first

SIMPLES

Oh and next thing you will need is a FlatShifter.......well worth the dosh.

mmm maybe when the cage is in
the tyres bought
the harness' changed
the car is mapped


thank you for your pic made my life an awful lot easier
the beers are on me



[Edited on 20/5/09 by eccsmk]