i'm about to begin work on a Gixxer kart (GSX-R 1100 powered kart) and hope some of you could help.

does anyone have a wiring diagram for soley the ignition and running of one of these engines? or even could you explain all i need for it to go?

thanks for your help.

it won't have lights or dials, just an engine and go and stop pedals (plus clutch paddle replies pending)

I am building a GSXR1100 oil/air cooled Locost and I have the Haynes manual. I could draw out the part for the ignition and running parts but it will have to wait till the weekend. I will post it up.

Adam

P.S Good choice of engine

i have the haynes manual, just finding it totally bamboozling just now, i don't know which parts i need and which ones i don't. then how to wire up the parts that i need since it's not exactly in it's natural environment that the haynes caters for.

cheers for your help

All you need are the ignitor, coils, start/stop/ignition switches, fusebox, circuit breaker, starter motor and errrrr, thats about it really. Work out what wiring qoes from where to where and your done!

Adam