Chassis/rolling chassis-why
huskychaser - 3/7/09 at 02:16 PM
Hi, had to re join, forgot password & changed internet supplier, anyway-- looking for chassis or rolling chassis for my bec, starting again, its
great to be back!!
kj - 3/7/09 at 02:20 PM
Just seen a Westfield rolling chassis on the westfield site, no panels no I.D but has hubs and suspension £1200.
speedyxjs - 3/7/09 at 04:40 PM
quote:
Originally posted by huskychaser
Hi, had to re join, forgot password & changed internet supplier
Send Fozzie a u2u and she should be able to sort it out for you 
huskychaser - 3/7/09 at 06:04 PM
Thanks for info any link??
mangogrooveworkshop - 3/7/09 at 09:57 PM
quote:
Originally posted by huskychaser
Thanks for info any link??
http://boardroom.wscc.co.uk/cgi-bin/ikonboard.cgi?act=ST;f=8;t=74281
Group: WSCC Member
Posts: 2
Joined: Nov. 2006
PostIcon Posted on: Jun. 29 2009,16:13 Skip to the next post in this topic. Ignore posts QUOTE
Westfield SE - 1988 Rolling Chassis With RAC Roll bar – alloy panelled
Front suspension inc brakes M16 Callipers, Cortina steel uprights , Coil overs, Steering rack upper and column with middle link, engine mounts X-Flow
, header tank, pedal box and master cylinder
Rear axle drum brakes with link bars and panhard road, fuel tank, hand brake assembly.
Dash with VDO instruments
Wiring harness – condition unknown
Rolling on steel wheels
No V5,chassis numbers no body panels
The chassis is straight has a some rust as it has been stored for many years.
Would make great or replacement chassis for damaged car.
I have posted photos on pistonheads
easisatman - 3/7/09 at 10:48 PM
Hi Husky Chaser if you have forgotten your passsword and changed internet provider its going to be easier to build a kit car than try and resolve that
problem
good luck and look forward to the photos
Paul