Hi all ,
can anyone reccommend a good BEC tuning outfit in the south yorkshire area to set up the fuelling on a megablade?
Thanks

What setup are you running ie:

Fuelling
Air filter/box
ExhaustCoil Packs
Etc

And What modifications have been made (if any) already?

It's running westfield suasage filter & looks like standard westfield megablade exhaust - with all the paperwork i got with the car their is an invoice from tts with a jet kit on it so i assume thats been fitted?
the car runs/starts/ticksover fine - emissions ok at mot - but once you get to around 8k revs she starts to hold back/stutter slightly - i assume at these revs she'll be running on main jets?? - the exhaust is very black so appears to be running rich?
any ideas??
thanks

[Edited on 18/7/09 by morcars]

Suggest that you speak to andy @ abperformance, he knows these engine inside out. I suspect from my previous conversations with andy that if the kit was supplied from tts then it may not be quite right for use in the car, andy has his own kits made up with specific jet sizes for car use.

ab performance 01449 736633

Roger

Definatly Andy on blade motors he is the man id even take mine there

Thanx for the advice - been speaking
to andy at AB - yep very knowledgable guy

Well guys thought i'd comment & 'commend' Andy at ab performance
took your advice and after speakin to andy sent my carbs down to him for checking/cleaning and a jet kit.
Absolute top guy - he only charged me for what was needed as the carbs had already had a dynojet kit installed
Dumped the facet pump&regulator for a bike fuel pump(andy's reccommendation)
Took 'her 'out for a Blat today-All i can say is wow -An sbsolute unbelievable difference she just pulls n pulls all the way to redline-i just car'nt stop
thanks for your advice guys & special thanks to Andy @ AB