2006 5VY loom problems guys if anyone can help!
on the 6 pin connector from the stock immobilser wires go to
yellow/blue stripe - pin 9 of ECU
red/white -
red green -
light bue - clocks
black - earth
black - unknown not connected at the mo

the last black one was prob part of the cycleock can anyone confirm where it should go.

the wiring diag I have doesn't show the immob circut from the transponder.
The engine def runs off a us loom & ecu . Now trying to get it to fire off its own ECU & key which has the immob. cheers D.

Wot nobody done an R1 with an immob then?????????