It's been a long hard slog to get to this point (like waiting 16 months! for the plenum after the company that was modifying the original burnt down) bits 'lost in the post...' bits not fitting or not working
But there is light at the end of this extremely looonnnggg tunnel...
last week-end was already to fire it up for the first time, but couldn't get the ecu to talk to the pc, spent the whole week-end pi$$ing about getting it to work,Then the lambda controller/display wouldn't talk to the ecu turns out i had to send the controller,ecu,loom back to the company i got it from. Oh yes and the injector plugs are different to the loom??? So waiting for some more. the car has been on the back burner for quite a while now due to new baby etc etc so happy just to be back out in the garage again

[img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=100_1850 [640x480].JPG[/img]

[img]http://www.locostbuilders.co.uk/upload/100_1849%20[640x480].JPG[/img]

[img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=100_1848 [640x480].JPG[/img]

[img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=100_1847 [640x480].JPG[/img]

[img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=100_1846 [640x480].JPG[/img]

[img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=100_1845 [640x480].JPG[/img]

[img]http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=100_1844 [1600x1200].JPG[/img]

can't get photo's to work...their in my archive.....if anyone wants to try

[Edited on 31/1/10 by cossiebri]

[img]http://www.locostbuilders.co.uk/upload/100_1850%20[640x480].JPG[/img]

No likey square brackets!

[Edited on 31/1/10 by RichardK]

you've also linked to the page the photo is on, not the actual photo itself, but mainly, its the square brackets doing it

the URL for the actual photo should look like this
http://locostbuilders.co.uk/upload/100_1850 [640x480].JPG
in fact, its under every photo in the archive, with the correct code

[Edited on 31/1/10 by blakep82]

Copy and paste the id under each picture.

[img]http://locostbuilders.co.uk/upload/100_1850 [640x480].JPG[/img]

[img]http://locostbuilders.co.uk/upload/100_1846 [640x480].JPG[/img]

Yup it looks like the square brackets round the resolution are confusing things

[Edited on 31/1/10 by r1_pete]

Image deleted by owner

It's the square brackets indeed. Confuses the forum BB Code thingy.

Looks very nice indead!!

Make sure you tidy up the wiring around the battery area. Looks like a bit of a fire hazzard to me.

that was far sexier than any locost