I've migged up an airbox for my ZX9 in the picture below

[img][/img]
I was wondering what kind of air filter people think I should use. I am going to attach it via an inlet that I will put into the circular bit in the picture. I was thinking a foam pipercross cone held onto the airbox with a piece of silicone hose as I'm a bit dubious of the quality of the cheaper cone filters and I like the pipercross too but I've also considered the internal funnel shaped pipercross (C6000) that goes onto the pipercross airbox but it worries me that if a piece comes off it may get eaten by the carbs. So I've come for advice on an aesthetics and performance balance.

[Edited on 8/3/10 by mistergrumpy]

ITG filters are very good and flow very well

I would put a pipe from air box to the front of the car with a cone filter
That way it will get cold air
Jacko

K&N, ITG, Pipercross, all pretty good!

What do people reckon to the cheaper cone filters? They seem to be a lot of steel mesh compared to the better names.

quote:

---

Originally posted by mistergrumpy
What do people reckon to the cheaper cone filters? They seem to be a lot of steel mesh compared to the better names.

---