Who does, or can do, an R1 engine cradle that will fit into a Mini subframe?

Or is it just a case of welding engine mounts at the right place?

Final one, who could make the sprockets etc needed to transfer power from gearbox to mini driveshafts (just like pro-motive's setup)

Mk engineering [ Martin ] or
Zcars
Jacko

Seen their price list then

Chain drive diffs can be got from http://www.westgarage.co.uk/services/chain/chaindrives.html

(If you check out their logo you may find a similarity to an avatar on here)

[Edited on 19/4/10 by iank]

quote:

---

Originally posted by iank
Seen their price list then

Chain drive diffs can be got from http://www.westgarage.co.uk/services/chain/chaindrives.html

(If you check out their logo you may find a similarity to an avatar on here)

[Edited on 19/4/10 by iank]

---

Will contact Mk to see if he can help if not too busy.

[Edited on 19/4/10 by mid-buggy]

That went a bit wrong.

[Edited on 19/4/10 by mid-buggy]

Martin at Mk engineering, will definately be able to sort you, well i'd be very suprised if he could'nt.

Lynx AE also did one in the front, and another one i can't remember.

quote:

---

Originally posted by irvined
Lynx AE also did one in the front, and another one i can't remember.

---

Zcars i would rank the best...

you can buy a full kit including, well, everything for a rear/mid engined mini for around 10k for the R1, or 7k for a volvo engine...

includes roll cage, suspension, engine, everything the engine needs to work, diff, front suspension, fuel tank...

http://www.zcars.org.uk/mini/volvo.htm

try pro motive
http://www.pro-motive.co.uk/R1KitInfo.html

if you change te engine position on a mini technically you need an i.v.a.

quote:

---

Originally posted by boggle
if you change te engine position on a mini technically you need an i.v.a.

---