Board logo

ZX10R First start finally !
Toprivetguns - 4/5/10 at 04:31 PM

Finally got round my starting problem. Turned out to be an issue with the immobiliser and how it recived voltage from the bypass (resistor). All sorted now!

Just inquiring about the ZX10 idle speeds?

Hellfire - 4/5/10 at 04:57 PM

No video footage, no start up...............

Phil

Flamez - 4/5/10 at 05:00 PM

quote:
Originally posted by Toprivetguns
Finally got round my starting problem. Turned out to be an issue with the immobiliser and how it recived voltage from the bypass (resistor). All sorted now!

Just inquiring about the ZX10 idle speeds?


mine ticks over around 1200, you may need to fit a spring on the return cable to shut off revs.

dazzx10r - 4/5/10 at 05:08 PM

tickover should be 950rpm +/- 25rpm. I set mine at 1000rpm for the easiest

Flamez - 4/5/10 at 05:49 PM

Mine's higher because the secondary butterflies have been removed, so slightly higher revs required when its cold.

Toprivetguns - 4/5/10 at 06:58 PM

quote:
Originally posted by Hellfire
No video footage, no start up...............

Phil



As requested, here you are sir...

http://www.youtube.com/watch?v=0FARjaMfAxQ

Flamez, ill look into that. I assume something hasn't returned the throttle back to idle position. However im glad it runs !