Board logo

jettting honda 919 blade
joni - 6/8/10 at 12:43 PM

hi lookin to no wot jets to use in bec 919 blade engine thanks jon

gingerprince - 6/8/10 at 12:46 PM

quote:
Originally posted by joni
hi lookin to no wot jets to use in bec 919 blade engine thanks jon


Depends entirely on your particular setup, e.g. your exhaust, inlet etc. There is no stock answer.

carpmart - 6/8/10 at 12:53 PM

As Mr Ginger says, its down to setting up the correct fueling for your car install as opposed to a generic answer!

rgrs - 6/8/10 at 12:57 PM

Phone the blade expert:

andy at ab performance
linky ab performance

He will be able to point you in the right direction and also supply the jets.

Regards Roger

Andy B - 6/8/10 at 02:57 PM

Thanks for the plug Roger

assuming you are using the blade self regulating pump so that the carbs are behaving correctly as a starting point try
Mains 132
Air screws 21/2 turns out
Needles DJ FLTV 50
Lift springs DJ uprated
Air correctors - blocked
Give me a call on 01449 736633 if you need more info
best regards
Andy