can anyone tell me were the resistor goes in the loom of a 919 blade and is it a 100 amp resistor
Depends which loom...
But (from a vodka addled memory) it's the pink wire in the ign and I think it's a 100 ohm resistor.
I may have one somewhere, if you don't already!
quote:thanks have some but thanks for help top man
Originally posted by Steve Hignett
Depends which loom...
But (from a vodka addled memory) it's the pink wire in the ign and I think it's a 100 ohm resistor.
I may have one somewhere, if you don't already!
the resistor is only needed for the 98/99 rrw and rrx looms, it goes in the pink wire to the ecu and we use 280 ohm to drop the voltage and get round
the security, the 100 ohm is used in the kawasakis
best regards
Andy
what does that do then
quote:top man andy thanks got her going last night
Originally posted by Andy B
the resistor is only needed for the 98/99 rrw and rrx looms, it goes in the pink wire to the ecu and we use 280 ohm to drop the voltage and get round the security, the 100 ohm is used in the kawasakis
best regards
Andy