Board logo

Anyone had their 5VY R1 on the dyno?
TimC - 15/9/10 at 07:14 PM

Has anyone put their 5VY engined car on the dyno? Could they share some stats / the curve?

Cheers

TC

daniel mason - 15/9/10 at 07:25 PM

is that the 2003 motor tim?
if so iain baker from mnr had his vortx at daytuner, u2u me and i will let you know incase he does not want the results printing

adithorp - 15/9/10 at 07:32 PM

I've had mine on dyno but it was more about getting the fueling right than doing power runs. Made just shy of 150 at the wheels and 170 flywheel (calculated from run down) on a fairly conservative dyno. I've unfortunatly lost the file with the graph leaving me just a poor quality hard copy with no torque curve.

adrian

a4gom - 15/9/10 at 08:06 PM

same as adi, just i think it was 147 @ wheels. 72 torques, if i can remember i'l
l take it to work tom and scan it in 4 u

[Edited on 15/9/10 by a4gom]

TimC - 15/9/10 at 09:01 PM

Cheers Chaps

The graph would be spot-on.

quote:
Originally posted by daniel mason
is that the 2003 motor tim?
if so iain baker from mnr had his vortx at daytuner, u2u me and i will let you know incase he does not want the results printing

That's a 5PW Dan. Thanks all the same.

[Edited on 15/9/10 by TimC]