Board logo

Polo Rad temp sender question
rf900rush - 21/9/10 at 08:59 PM

Until recently I was using a copper rad from (I think) a Suzuki swift with a RF900 fan switch in the top hose.

Now I have a polo rad for my ZX12R, what is setup for the Fan temp. sender ?

RichardK - 21/9/10 at 09:04 PM

I am using the original polo temp switch which works at these temps, maybe of use mate.



Cheers

Rich

Breaker - 21/9/10 at 09:13 PM

quote:
Originally posted by rf900rush
Until recently I was using a copper rad from (I think) a Suzuki swift with a RF900 fan switch in the top hose.

Now I have a polo rad for my ZX12R, what is setup for the Fan temp. sender ?


I'm also using a ZX12R. Looking at the electric drawings I think it should be possible to use the original loom to connect to temp sender and fan.

joni - 21/9/10 at 09:16 PM

can you get one that comes on at say 90 degrees

meany - 21/9/10 at 09:21 PM

have a rummage on here.
http://partfinder.smpeurope.com/index.html?p=156&partid=50013&from=155&SESSID=8qdv68b8df9pv9g05k96sn0ma4

rf900rush - 21/9/10 at 09:23 PM

Thanks.

Going by the diagram does the polo have a 2 speed fan.

meany - 21/9/10 at 09:24 PM

quote:
Originally posted by joni
can you get one that comes on at say 90 degrees


http://partfinder.smpeurope.com/index.html?p=156&partid=50014&from=155

[Edited on 21/9/10 by meany]

RichardK - 21/9/10 at 09:35 PM

quote:
Originally posted by rf900rush
Thanks.

Going by the diagram does the polo have a 2 speed fan.


Mmm mine did although have only one wired up

adithorp - 21/9/10 at 10:48 PM

Some have single speed fans and some have twin speed. You can get the switch/sensor in several temp ranges.

adrian

dhutch - 22/9/10 at 11:40 AM

I just bought a std temp sender with the right thread for £12 odd.

not got around to fitting it yet but seemed simplest way to me.