Guys,

Just taken apart the HT leads for my blade but being an idiot I forgot to note which lead went to which connector on the first coil!

How do I tell which lead goes to which coil connector when I refit them??

thanks,
Rich.

no.1 plug goes opposite yellow/blue
no.2 goes opposite blue /yellow
no.3 goes opposite black/white
and
no.4 goes opposite other black/white

have fun..........

cheers
colin

no, shit.....what model u got...oops...
that is for up to rrs models....

[Edited on 15/7/04 by colibriman]

[Edited on 15/7/04 by colibriman]

RRR so that should be fine, ta.

Rich.

no problem.....

Image deleted by owner

Not sure if it's the same for all models, this is from a '97

Cheers.

Later engines are a different way round on the wire colouring, as I found out when wiring up a mate's 93 blade engine the same as my 99 engine and producing a moosiv backfire when trying to first start it, without any silencer on

i spotted that last night when i was checking the haynes....i did wonder what would happen.....

Backfire, lots of backfire!