Board logo

5VY overide neutral only start
swalf3 - 7/6/11 at 06:14 PM

Any advice please to get 5VY R1 to start in any gear position?
Thank you.
swalf3

StevieB - 7/6/11 at 06:40 PM

Should be as straight forward as finding the side stand switch and join the two wires together.

swalf3 - 7/6/11 at 06:59 PM

Steve,Thank you.I'll try that.
swalf3

Johneturbo - 7/6/11 at 10:15 PM

To start in gear you will also need to find the clutch switch and make the circuit

ETA blue/yellow and black/yellow are the clutch switch wires, join them together for any gear starting...but don't leave it in gear when you turn it over

[Edited on 7/6/11 by Johneturbo]

eddie99 - 7/6/11 at 10:19 PM

You'll need to find the clutch switch, and possibly put that to a momentary switch. If you just connect it up, then some modern bike engines cut second injectors and do all kinds of funny things. I have a small momentary switch on the steering wheel.

[Edited on 7/6/11 by eddie99]

Johneturbo - 7/6/11 at 10:24 PM

quote:
Originally posted by eddie99
You'll need to find the clutch switch, and possibly put that to a momentary switch. If you just connect it up, then some modern bike engines cut second injectors and do all kinds of funny things. I have a small momentary switch on the steering wheel.

[Edited on 7/6/11 by eddie99]


Nope you just need to join them together on the 5VY

swalf3 - 10/6/11 at 10:42 AM

Thank you everyone for the solution.
All the best.
swalf3