Board logo

Fireblade exhaust manifold/downpipes info
ReMan - 20/8/11 at 01:38 PM

Anyone know how different the different year pipes are where the flange meets the head?
Looking to pick up a scruffy cheap one to chop up to make a turbo manifold, but not sure which I can get away with that the flanges are the same as the 893

[Edited on 20/8/11 by ReMan]

Andy B - 20/8/11 at 03:21 PM

They are all the same from 92 to 99 then change fror 2000 through to 2003 , change again 2004 through to 2007 and big change again in 2008. Let me know what you need - might have something laying about that would help
regards
Andy

[Edited on 20/8/11 by Andy B]

SPYDER - 20/8/11 at 05:46 PM

Hi there. Please be advised that RRY pipes, 2000-1, are Titanium as standard. I don't know if later ones are Ti or not.
Geoff.

ReMan - 20/8/11 at 09:16 PM

quote:
Originally posted by Andy B
They are all the same from 92 to 99 then change fror 2000 through to 2003 , change again 2004 through to 2007 and big change again in 2008. Let me know what you need - might have something laying about that would help
regards
Andy

[Edited on 20/8/11 by Andy B]


Cheers for the info Andy.
Looking to do a locost turbo that's reversible if it all goes horribly wrong/nasty/kills it
I want to get the turbo outside the bodyork, so a bit longer than ideal primarys, but what the heck.
So looking for set or two even if theyre scuffed up to cut and shut to suit with MIG.
If it all goes well then can always upgrade to bespoke ss