Hi all, I've been doing some research on flatshifters & have found some info on making my own, just wondering what everyone's thoughts are really?
There is a link below & on page 2 someone has posted that a micro switch can be connected into the power commander 3, if this can be done does anyone know which pins to connect it to? Cheers

http://bristolkitcarclub.co.uk/smf2/index.php?topic=1400.0

You need to install a software 'upgrade' into the powercommander to activate the flatshift function.
(believe that it can be 'found' quite easily)
Then just two wires into the auxilliary port - can't remember which two pins though....

Thanks for that info, just had a quick search & have found some good info & a file to download to activate the function, it still doesn't tell me the pins to connect to on the pc3 though.

" Hi Everyone, Just a Quick Heads up regarding Power Commander Settings

With ALL Quick Shifter and the PC III USB:

The Quick Shifter function on the PC III USB needs to be "enabled" before it will work.

This is done by downloading the "PCShiftKillEnable.exe" program and running it on a PC with the PC III USB connected.

The link to get this file is:

http://www.powercommander.com/downlo...KillEnable.zip

I recommend that you download and save the file first, and then use it to upload to your PC III USB.

Bikes prior to the 05 - 06 era do not require the ignition module and can use the Nextup Quick Shifter and our PC III USB Connector to go straight to the Power Commander"

Should be able to figure the pin-out from this picture.....

That great, cheers