i've bought a tank at the donnie show
..ally tank seems really nicely made..does anybody know if running a 97 blade engine with electric pump mean i would/would not have to use the return feed and if not how do i block it up

If you don't mind me asking, how much did you pay for the tank?

£95..not sure if its a good price but it was there i needed one and took it to work and showed the welders who were impressed with the quality.

As the blade engine is carbed you do not need a return to tank. if the tank is fitted with a breather just block it off with a bit of old pipe and a bolt
or get a non return (one way valve) and plumb it in as a breather

Mike

£95 sounds good but £60 sounds better

quote:

---

Originally posted by Viper
£95 sounds good but £60 sounds better

---

quote:

---

Originally posted by protofj

quote:

---

Originally posted by Viper
£95 sounds good but £60 sounds better

---

Go on then Viper - where did you get your tank ? and is it a good fit in the Avon ?

---

MY tank is stainless.

I do a standard tank for book/mk cars in Alli for £60

Can do you an Avon tank as per the tiger book In alli for £60.

Stainless costs a bit more at the moment because the material is currently quite expensive.
Tim

Standard tank for book chassis
Rescued attachment P1010001.JPG

Viper,

Is that the same dims as per the book? or is it your own design to fit a standard book chassis?

If its your own design can you give me rough meaqurements so i can check it in my chassis.

Cheers
colin

How's this?
Rescued attachment tank dims.jpg

thanks, i shall get the tape measure out me thinks