Hi

I am building a GSXR1000 car and I have noticed that the stock GSXR pump probably wont work as it was designed to run inside the tank.

Are there any other bike pumps / fuel regulators I could use? Do you know if the injected CBR fuel pump would work?

Thanks alot,

Mark

my busa pump was the same,so martin made me a swirl pot about 2 inches deep and i attached the pump to that ,the problem then is that the bottom of the fuel pump is about 4 inches below the bottom of the tank so i had to raise the tank up as far as it would go

Thats a good idea ... I might do the same.

Are you using a pump between the main tank and the swirl pot or is it underneath fed by gravity? o you think you can post some piccys of it up next time you update your site?

Thanks very much for the reply!

[Edited on 20/10/04 by MarkClow]