Board logo

What's my locost fireblade worth flatshifter expert etc
Nurburg2006 - 12/5/15 at 09:37 PM

Hello guys. Ive go a part built locost fireblade what it worth. It's carbon wrapped black arches green sides roll cages escort 3:54 diff escort quick rack 2:4. Westfield exhaust system complete. Fibreglass seat, harnesses I've got a acewell digi dash flatshifter expert quickshifter ap paddle shift savage switches, revolution alloy with Yokohama a539 tyres. Etc etc. anyone interested please u2u me cheers


Doctor Derek Doctors - 13/5/15 at 07:22 AM

Its really hard to say how much its worth but one thing is for certain and thats that it will be worth more if sold as parts.

How much for the quickshift? Also what spec engine is it? 919cc?

[Edited on 13/5/15 by Doctor Derek Doctors]


Nurburg2006 - 13/5/15 at 08:09 AM

Not sure what they are worth. The engine is carb fitted with a billet sump prop adaptor, I paid £400 with the control units. At this point I want to see what interest there is before I break it into lots. U2U me if you have any other questions. Cheers


Matt21 - 13/5/15 at 11:32 AM

How much for the paddle shift, baffled sump and digidash?

vultures....


Nurburg2006 - 13/5/15 at 11:44 AM

Thanks for your question, I am just seeing the level of interest in it at the moment please u2U any offers. Cheers.


locost7-online.com - 13/5/15 at 03:03 PM

If you decide to split I'm lookin for a blade setup for my new avon


Nurburg2006 - 13/5/15 at 03:46 PM

For got to put its has a full cage but missing the door bar.


ian locostzx9rc2 - 13/5/15 at 03:58 PM

If you really want to sell it your better putting a price on it .


locost7-online.com - 13/5/15 at 04:00 PM

I've just noticed where you are, I'm working in tonbridge, I'm interested in engine complete with prop etc, paddle shift, acewell etc


Nurburg2006 - 13/5/15 at 06:34 PM

Any idea guys if I were to break it into lots????


scootz - 13/5/15 at 07:11 PM

If it has no V5, then it will be a worth a lot more in bits!


Nurburg2006 - 13/5/15 at 09:29 PM

Can anyone put values on the above to give me an idea what it's worth. Cheers.


Matt21 - 14/5/15 at 06:55 AM

Stick a few pics up, gives people a better idea of the quality etc so they can decide what its worth

From seeing unfinished projects, prices can vary dramatically, but never anywhere near what you will have put into it.