Westfield Hayabusa Gen 1. No reverse system - straight through prop.
When take off from junction getting a worsening vibration/rumble - at low speeds. No vibration when driving normally or accelerating. This only
happens from a standing start. It is fairly noticeable now, but strangely only evident when accelerating from a junction/stand still.
Any ideas guys? Anyone came across this or similar before?
on a standard engine setup the first thing would be to
check engine/gearbox mounts
but on a bec... it might be all solid mounts - still check them and the diff mounts too
Could be an unevenly worn clutch, I had this on the Fiesta. I replaced all the engine mounts but really it just needed a new clutch.
Check the propshaft bolts, from what I've read in the past they have a habit of working lose at the engine prop adapter.
quote:
Originally posted by pmc_3
Check the propshaft bolts, from what I've read in the past they have a habit of working lose at the engine prop adapter.