Got a 99 busa & need to mod sump, ie chop & baffle. Also need help with modding the loom to run in a westie if possible. Has anyone got a picture of sump or loom diagram ?

i have a westy sump you can buy for the busa

IS this the wet sump & how much?£££

yes it is a wet sump but you wont be needing it now seeing as your gonna modify yours

Have mercy Ox, the man has a trackday at Kirkistown on Sunday he's trying to get to!!!!
Post him a pic at least!!


WAM - I take it it's you I was talking to at the NI7s do on Sunday, and at the petrol station afterwards?

Got this list of loom mods from Walt on the Yahoo BEC list, worked for me but mine is a Dax Rush and I made the rest of the loom myself, if you're using a Westfield loom you'll need to check with Westfield.

> Tilt takes a 68Kohm resistor, 1/2 W but use 1 W because it will take more
> physical abuse.
> Sidestand takes a jumper
> Clutch lever position takes a jumper
> ECU needs a 150ohm resistor between O/Y and B/W 1/2W but use 1W because it
> will take more physical abuse
> Engine stop switch takes a jumper