i'm really struggling to get this blade engine sparkin..(see all threads on coil blade testing) i;ve had colibran and berwyn on the phone and niether can see a wiring fault. ive tried all suggestion and before i cure it with a litre of 4 star and some swan vesta's i am really desperate and am off for a week now so can travel..

i need to test my coils and cdi or need to loan a cdi and coils

PLEASE HELP..??

Berwyn mentioned he had a spare, could he send it to you so you can have a go with his??

YEH HE CAN BUT HES ON GOING OM HIS HOLS

I have spare coils and a spare 97 (so would need a resistor) CDI you could gladly borrrow, but i'm in South Leicestershire, so unless someones passing who could pick them up then its going to get silly with postage.

In my humble opinion and applying a rule that I use regularly at work (Service Team Leader - (Electronic and Electromechanical equipment)), that the more expensive, difficult to get and harder to fit a part is, the less likely it is the problem.
I especially do'nt want to take anything away from the guys who have been helping you try to sort it, but I would be surprised if it was either of these parts and much more likely a self induced or unlucky/silly fault.
I hope i'm proved wrong.
In the mean tiime perhaps you could give us some more info as to how you've wired it, with what loom? What voltages you're getting, what you've done with the clutch diode? ECU wires? Whatever? so we can try and help some more.
I hope this does'nt come over as patronising, it's not intended to be, just trying to help as a recent similar "victim" of the Fireblade wiring of doom!
Colin