Board logo

has the sump got to be chopped
Chris7 - 31/8/03 at 09:54 PM

Hi
i am building a book built locost and would like to know if i have to chop the sump on ZX9R Engine .


Jon Ison - 31/8/03 at 09:58 PM

in a word, yup. Two or three on here have done it so they will point you in the rite direction.


Chris7 - 1/9/03 at 07:17 AM

Hi

Is the reason for this that so there is more ground clearance, or if i mount the engine higher will this not have to be done

the reason i ask is that if kawasaki wanted the sump chopped they would have chopped it does it run as good with this modification .

any help much appreiciated .


Chris7 - 1/9/03 at 12:08 PM

Hi

Found some bodywork from Leugo which is 2inch higher than normal body work for locost which should take care of the problem of having the sump chopped .

Thanks Chris


coozer - 4/9/03 at 07:00 PM

Mistral chopped mine,put the drain on the side, modfied the pickup, supplied a baffle and new gaskets.
Well worth the 150 notes if your worried about it hanging down as it does!

Steve


ChrisGamlin - 4/9/03 at 07:15 PM

Its mainly only done for clearance benefits, with regular Locost bodywork you'll struggle to get it under the bonnet and not be virtually dragging the ground without a sump chop. Whilst its being chopped you can also have a few baffles added which will help keep oil around the pickup in a BEC installation, so there are other benefits too.
If you need it done then gimme a shout as my uncle has done several ZX9's now, including Jaspers, for £50 including modding the pickup, putting in baffles and putting the drain plug on the side.
I think Jasper has some pics in his gallery if you want to have a look.

Chris


tadltd - 4/9/03 at 11:08 PM

Stuart Taylor do billet machined sumps for the ZX9. I think they're about £120 (check their web-site for details).

But it sounds like Chris' uncle is your best bet if your counting the pennies!

Steve.


Chris7 - 5/9/03 at 08:47 AM

Hi

Cheers for that info i will see when its ready for fitting i need to make the sump smaller i think i will speak to jasper if is uncle knows his stuff will be well sorted .


ChrisGamlin - 5/9/03 at 08:54 AM

Just to clear up the confusion, it wasnt Jasper's uncle, he got his sump done thru John, MY uncle .






Chris

[Edited on 5/9/03 by ChrisGamlin]


Jasper - 5/9/03 at 06:47 PM

And a very nice chap he is too! Will make up other nice ali bits for you as well if you ask him nicely and grease his palm.