Hi all,

I'm trying to find a fule sender to fit in my MK petrol tank. I'm putting in a 2000 R1 engine with Koso Gauges, it says i need a 510 Ohm sender unit but i can't find one anywhere....any idea's.
Cheers
Adam

think most senders are 510 ohm.

none of them really state what ohm they are only one on ebay that does says 220 ish i think

Cheers
Adam

I have used a Honda Blackbird with the Koso. It is reading (although needs some adjustments made). Any motorbike (not tiny scooter) should provide you with a good small gauge.

Yeah I've read that somewhere but wouldn't a bike sender not reach the bottom of the tank?

I used a sierra one from lolocost but it does require some adjustment

James

according to spec I have avaliable R1 fuel sender is 899.7 to 900.3 K ohms at 25deg C

Really struggling now.

Can't find on anywhere which states the correct ohm. If i use a bike sender, surely it won't reach the bottom of the tank.

Is there anywhere which sells universial ones?
Cheers
Adam

quote:

---

Originally posted by martin1973
think most senders are 510 ohm.

---

As far as I know, they are either 100ohm or 510 ohmI have Koso gauges and I am using a CBR1100 Super Blackbird sender. It needed some adjustment (careful bending) but now works wonderfully (on 100ohm).

quote:

---

Originally posted by twybrow
As far as I know, they are either 100ohm or 510 ohmI have Koso gauges and I am using a CBR1100 Super Blackbird sender. It needed some adjustment (careful bending) but now works wonderfully (on 100ohm).

---