I've done a quick search but cannot find anything on this.
Does anyone know where, if anywhere, we could get hold of OEM type connectors for bike engine sensors etc to construct a BEC harness from scratch.
This is for a grasser using a 'busa and I don't know whether they would be Suzuki specific or 'busa specific connectors, or whether they are called something else and just used by Suzuki because they suit the application. I appreciate that it is possible to strip down a full harness but they are quite expensive at the moment and if we knock one up ourselves it would leave an intact used one out there for someone building a proper BEC!
Any pointers gratefully received.

i would try deff the suzuki dealer, saying that i think he only can buy complete sensors and cabled stuf..

i just would use the loom from the engine..and just rewire that one..

Tks

p.d. you could ask powercommander where they buy their stuff...
(but it isn't an easy one)

i asked in my local bike place about 2 weeks ago as i need to rewire a fw i cut off right at the plug, he did say a place you can get them from and i have seen a site mentioned before, not sure i you can get all of the connectors though r just some of them.

There is somewhere selling all kinds of bike connectors - I've got a link on my PC at home - will have a look later.

Wyn

Only place I found was http://www.dataspares.com/acatalog/Connectors_.html but they are a fearsome price. Bound to be cheaper to buy a second hand loom.

Hi Richard what year busa i may have a spare loom you could have cheeeeeeep

cheers malc

Hi Malc, it's an '03. If you have anything please drop me a U2U. Sooner I get this sorted, the sooner I can get back to my car! Cheers, Rich