can't get a spark, but there is power up to the coils.

Any ideas or is it get the control unit checked out. Gone over connections etc and cant' find a nice simple solution

engine hasn't been run for a while ,but was ok proviously.

phil

Remember on the fireblades the coils have a permenant 12v to them (provided stop switch closed) the coils are fired by applying a neg to the yell+blue or blue+yell

which engine is it ?

Roger

it's a 97

Call me on 01449 736633 - I have a few ideas that will probably sort it out
regards
Andy

No point me offering any advice now!!!
Steve

quote:

---

Originally posted by Andy B
Call me on 01449 736633 - I have a few ideas that will probably sort it out
regards
Andy

---

All working again------huge thanks to those who sent me advice !!

Special thanks to Andy Bates from AB performance who spent a sunday afternoon on the phone helping me to sort the problem out----he sent me out a loom, pulse generator and ignition control unit to help me sort out the fault, only wanting payment on me finding the problem and returning the items not used ------------also he helped me with the carbs set up after the spark prob was sorted

Once again a great example of locost builders at its best