hello all

i cant for the life of me find the speed sensor wires on my busa engine, i have a 3 pin connector on the loom for it but cant find the connectors on the engine

any help is much appriciated, also photos would be great

cheers

Finlay

When you say speed sensors, do you mean for the tacho or something?

yea, i was told that there shold be 3 cables to a 3 pin connector coming out of the crankcase area that should connect up to the busa instraments on the dash, what does your busa engine have ?

cheers

Finlay

If I remember correctly, there is a triangular 3 pin connector that comes from the case near the output shaft - that is the gear position sensor plug I think. There is also a plug that comes from the clutch cover area...can't remember what that is without my book.

im sure its the wires coming off the sprocket cover that your after

I it's on the cover for the sprocket.

I have a picture in my photo archive.

[Edited on 4-4-08 by Gerhard]

thanks gents

well that certainly explaines why i cant find it as i m not using the sprocket cover, it never came with the engine, i m using a special machined slave cylinder barcket so that it fits in beside the gearbox output flange

oh no, hahaha,

any ideas on how i can hook it up once i get one from a breakers

cheers

Finlay

quote:

---

Originally posted by richard thomas
If I remember correctly, there is a triangular 3 pin connector that comes from the case near the output shaft - that is the gear position sensor plug I think. There is also a plug that comes from the clutch cover area...can't remember what that is without my book.

---

Finlay
I have a brand new Busa speed sensor along with both plugs. Let me know if you are intrested.

Jason

quote:

---

Originally posted by Jason Fletcher
Finlay
I have a brand new Busa speed sensor along with both plugs. Let me know if you are intrested.

Jason

---