Board logo

R1 Cat
Adam - 13/4/08 at 09:13 PM

Hi all,

I've done a search for this but can't find the answer.
I've read a few people have bought cat's for the SVA Off eBay in the states but can't find any links. Can anyone point me in the right direction.

Cheers
Adam


Paul TigerB6 - 13/4/08 at 09:22 PM

Think this is the one. I'm sure someone will confirm


Paul TigerB6 - 13/4/08 at 09:26 PM

There is also this from the same seller. Is that a boss for a lambda sensor on that one i see??? Says its an "O2 bung" so guess it must be - could save people a lot of problems getting one welded in!!!

[Edited on 13/4/08 by Paul TigerB6]


Adam - 14/4/08 at 07:35 AM

I have a carb R1 (2000) So figure i don't need a point for a lambda sensor? or am i wrong? I have clicked on the link but it seems they don't post to the uk... i have emailed them and asked.

Cheers
Adam


Paul TigerB6 - 14/4/08 at 07:55 AM

No you wont need a Lambda sensor. Posted the link up for the benefit of those that would like to or need to fit one.

I did notice the postage issue. I am sure there was another supplier in the States but its that same item. Total cost with the import duty and postage was around £50 so you are looking at a quote of around $80 posted and then the VAT / duty on top (which will add about 20% - 25% to the quoted price) so see what price he quotes for postage.


chris_harris_ - 14/4/08 at 09:55 AM

I bought two of these as it was cheaper on postage. Meaning i have one spare. u2u if your interested.


Adam - 14/4/08 at 12:12 PM

U2U sent


Pezza - 14/4/08 at 03:24 PM

Just what i'm after too.
Says they only post withing the states though


CRAIGR - 14/4/08 at 03:36 PM

Has anyone used one of these and got through sva with it???