Anyone happen to know the pitch of the threads on the mounting points on an early zx12 (A1). The exhaust outlet side??

just had a quick look mine is held on with m8x20 studs
HTH

[Edited on 25/5/08 by eccsmk]

The mounting point?? Or did you think I meant the exhaust?? Unless yours is a later one with the central mounting??

IIRC - The two front mounting points in the front face of the ZX12R are M10x1.25 (fine pitch).
However, I did re-thread them on an engine I had for M10x1.50 pitch helicoils (easier to get metric bolts as I was not using original ZX12 bolts/mounts).

sorry mine is a later model
doh