Hi, after 3 months away from the project ive forgotten where everything is going and almost lost the will to complete it. Hopefully someone can help me with this frustrating question i have and get me back on track. (r1 5pw)

I have my 2 pole ign barrel wired to a starter switch and i have the starter relay with the white blue/white/red and red white connected. where do i connect in the wire from the starter switch to the relay? and do i have to change any other wiring?
Also on the relay what are the B and M for?
Thanks for any help
Adam

On my loom I just had a blue/white wire that goes to the start button the other side of the button goes to earth.

Not sure what the B & M are, sorry

HTH
Stu.

Hi on the starter solenod try
B for Battery and M for starter Motor

cheers malc