Hi put this post on the Mac1 froum page but guess was a bit narrow minded of me so ill open it up. I have a Mac1 (worx zx10) on order and I pick it up 19th July. I live in Rayleigh in Essex and this is the first time I have done anything like this and at some stage I might be in some desperate need of some advice. Also when ,hopefully completed would be a blast getting together with folks for a spin out from time to time.

many thanks

steve

It doesn't matter where you are - if you have any questions, just post them up on here and I'm sure that you'll get plenty of quick answers.

Lots of people have built BEC's and it's unlikely that you will have a problem that no-one on here has seen before.

Cheers

mark

There is always Colin and mark at Mac1, I have found them both fully supportive.

They would always be my first port of call during the build.

Yes Flamz they are top boys and will be on the blower to them all the time.

Theres a MNR BEC in Rayleigh

Yes Steve has an MNR R1 in Rayleigh, George is building an MNR at Sth Woodham Ferrers, there's me with the Furore at Benfleet & Jason with a MK Indy Blade at Laindon so there are a few of us for a blast once done. Don't know of any Mac1's round here, but it's all nuts & bolts - I'd be happy to lend a hand if you were stuck on something or needed special tools,hoist, trailer etc.

Good luck with the build anyway!

I'm also in rayleigh with a Blade Fury. Good luck with the build and if you want any advice/help then your definately on the right forum and as russbost said tools etc. aren't a problem.

I'm a short dib in Kent with an MNR R1