Chaps

Can anyone recomend me a supplier for BEC engines looking at either an r1 or fireblade unit 2nd hand, trying to keep the cost down so wont be looking at new or nearly new.
apreciate any contacts and ideas on prices
cheers
James

You could try Malc at Yorkshire Engines and also Andy Bates at AB Performance - both are forum members here

Yorkshire Engines

AB Performance

hello i would say go to malc as he will give you a good deal and a very good service also a very good man and give a guarantee on all his engines and most will tell you the very same on here all the best paul http://www.yorkshireengines.co.uk/

If you'r looking for an older engine, there is always the opption to buy a complete bike and break it. You will have a complete tested unit with everything you need to run and a resonable pay back from the bits you sell on

As ReMan says if your after a older engine,just buy a complete bike off ebay for example,you can pick them up for a few hundred quid,you then get all the running gear you need,clocks etc,then sell on the parts you don't use,this way you end up with a very cheap engine,if your lucky with the sale of the rest of the bike you may even end up with the engine for free,and you know its a good runner.

Malcs the man to speak to! picked my R1 up from him a week or so ago. less than 2500 miles on the clock. Fookin long drive to pick it up tho!

Dave

quote:

---

Originally posted by MK chippy
Malcs the man to speak to! picked my R1 up from him a week or so ago. less than 2500 miles on the clock. Fookin long drive to pick it up tho!

Dave

---