hi guys
my digidash always shows O.I.L.
i had a look at my engine yesterday, and it looks i have no oil pressure sensor (orange wire) and no oil temp sensor.
i still have OE oil pressure/level fitted on baffle, but i think digidash doesn't work with it
help needed, i'm a big zero in wiring issue (and a couple of other things....for sure)

I believe that if it isn't connected you need to set the threshold for the low oil pressure warning (the 'OIL' on screen) to 0. This deactivates the the alarm I think. Might need to check the manual on that one.

Edit: I'm assuming here that you've got an ETB digidash

[Edited on 15/10/08 by andylancaster3000]

i'll try this tonight
anyone can tell me how to fit pressure and temp sensor on r1?? (to fit with digidash lite of course)
cheers

On my bike engine blackbird and ZX12. My oil pressure sensor fits on a flexible pipe connected to the oil pressure switch connection. The pipe and connection are available from ETB.

tried to set all "oil values" to zero, but OIL alarm is still on.
wich wire is connected to oil pressure sensor? orange one isn't it?