Evening all,

I've lost the nyloc nut from my lower maxi ball joint after some maintenance this weekend.

Am I right in staying it's an M12 x 1.5 fine pitch nut ?

Thanks,

Andy

I wouldn't have thought it would be metric on a maxi

Probably 1/2 unf

A quick Google suggests the thread on the ball joint is M12x1.25mm.

As to the pinch bolt in the Sierra hub I'm not sure (kept the ones that were in them), but would suspect metric like the other Sierra fasteners.

They can be metric or imperial depending on the make.

Thanks guys

Measure the diameter and pitch of the threads to be sure