I am now in a position to offer a few useful services to fellow kitcar builders and others.

My website is http://kitcarservices.co.uk which outlines most of what I can offer.

These basically include:

Turning (up to 19" diameter) - this could be anything from suspension spacers to custom hubs.
Electrical and electronics work
Donor part reconditioning (including type 9 rebuilds at competitive prices)
Throttle body respacing (including fuel rails)

and all sorts of other things.

Prices will be given on a job by job basis.

Cheers,
David

good luck david!

Some examples of turning:

* Blanking plugs for throttle bodies
* Bushes made to your requirements (aluminium, brass, nylon, bronze etc)
* Spacers (for suspension, rose joints etc)
* Propshaft spacers - made to your requirements. Properly bossed and recessed to ensure concentricty
* Hubcentric wheel spacers made to your specification
* Camber adjusters to your sizes (for front or rear custom wishbones)
* Threaded tubes for wishbones - with your choice of thread including M18x1.5 for transit track rods)
* Custom aluminium gearknobs
* Indicator stalks
* Custom made aluminium fuel rails, aluminium extrusion, drilled to your requirements for injectors, end tapped 3/8BSPT, ready to fit brackets
* Sierra upright tapered adaptors eccentric or concentric, your choice
* Concentric clutch cylinder spacers to your requirements drilled to suit your application
* Custom alternator pulleys single vee and poly vee
* Custom water pump pulleys as above
* Trigger wheel fitting pinto and crossflow including trigger wheel – laser cut trigger wheels and pulley modified to fit your application. Trigger wheel fitted on turned disc to ensure concentricity
* One off hose joiners
* Custom hubs
* Thread cutting available, both metric and imperial

Good luck with it mate!!

your website keeps mentioning 'our services'. so who is your partner in crime dave?

you also have a typo in your 'about me ' section it should read

.....Formula Student projects for several years'

you missed of the 's' in years, lol

Good luck with the new venture Dave

[Edited on 27/7/09 by omega0684]

I will be in touch with a job then

Have bookmarked your site David. Will probably need to use your services in the future

Best of luck mate! I will point anyone our way who needs a service you can offer!

One comment on the website - you might want to make the picture in the top left corner a tad smaller... 268kb for an icon that size explains why it took so long to load the pic!

Mark

Goodluck i have bookmarked your site.

hi David can you do Sierra rack extensions?

Not bothered about the material as long as its fit for purpose. steel or ally i guess?

Im after a price on a pair.
thanks

BTW the site is really slow to load up the different pages.

[Edited on 27/7/09 by locoboy]

quote:

---

Originally posted by locoboy
hi David can you do Sierra rack extensions?

Not bothered about the material as long as its fit for purpose. steel or ally i guess?

Im after a price on a pair.
thanks

BTW the site is really slow to load up the different pages.

---

Nice one David.
I wish you all the luck in the world.
May even U2U you in the future for a fuel rail, when I get that far.

good luck Dave hope all goes very well for you .also nice to know some 1 on here can help with this type of stuff all the best Paul

Thank you for the support gents.

I thought I would post some pictures of a selection of the bits I have made as examples:

Duratec billet fuel rail

Duratec billet fuel rail

Simple ali spacer

Aluminium spacer

Type 9 cable speedo blanking plugs

Type 9 speedo blanking plugs

GSXR Injector blanking plugs

GSXR injector blanking plugs

And the above fitted

GSXR injector blanking plugs

Throttle body adpators

TB Adaptor