Board logo

Fibreglass body panels in tangerine orange
scoop - 9/7/14 at 03:23 PM

Hi,
The car has been sold for some time and these have been stored in the garage since then so I have given them a wash and taken some pics.
Can't remember who the supplier was now. The panels include the scuttle, bonnet, nose cone and short front wings
They are all in as new condition apart from the very front of the bonnet which somehow has picked up some damage but could easily be removed with only the loss of about 5 to 6mm of that leading edge.
They are designed for the locost chassis and are an inch taller than standard to allow for taller modern engines.
Looking for £200 for the lot.
Happy to wrap them up if you want to arrange a courier but would prefer collection and cash.
They are located in Lowestoft, suffolk.
Email me for pics etc if required at carcrazycoop@msn.com

scoop - 10/7/14 at 05:52 PM

Bump for the day

robinhoodman - 11/7/14 at 04:47 PM

hi
Can you tell me what the dimensions of the scuttle, bonnet, nose cone and front wings are please .

J.brownster79 - 12/7/14 at 06:20 AM

Email sent to you fella

big_wasa - 12/7/14 at 07:51 AM

Put some photos up mate they look like GTS panther / Locost which have really nice lines and are perfect for a book locost. And rare to

[Edited on 13/7/14 by big_wasa]

scoop - 13/7/14 at 08:20 AM

That's what they are. GTS. Thanks for that. I'd love to put pics but can't.
If you email me I will send them to you.
Sorry for slow replies

scoop - 13/7/14 at 08:29 AM

quote:
Originally posted by robinhoodman
hi
Can you tell me what the dimensions of the scuttle, bonnet, nose cone and front wings are please .


Will go out have a measure for you but will defo fit standard book chassis because that what as I built as per my avatar

scoop - 13/7/14 at 08:29 AM

quote:
Originally posted by big_wasa
Put some photos up mate they look loke GTS panther / Locost which have really nice lines and are perfect for a book locost. And rare to


You have a reply.
Cheers.

scoop - 13/7/14 at 08:53 AM

quote:
Originally posted by J.brownster79
Email sent to you fella


The width of the panels from the driver are; scuttle 107cm, bonnet 97cm and nose cone 67cm.
That's as they sit on the floor so can be flexed a little with way.
Cheers,
Steve.

scoop - 13/7/14 at 08:55 AM

quote:
Originally posted by J.brownster79
Email sent to you fella


You have a reply.
Sorry Big Wasa, not you

scoop - 13/7/14 at 10:17 AM

SOLD I'm pleased to say to jbrownster. Collected and paid for.
Thanks for the interest.

J.brownster79 - 13/7/14 at 11:27 AM

Cheers for that Steve my hand built sports car is pleased she is starting to get her outfit! 😊

scoop - 13/7/14 at 04:57 PM

Pleasure. Nice one