Ebay linky

Not that cheap but maybe handy.

It's a 7 degree though

well then either cut the flange off an reweld it or just put the geabox on the piss!!

(joke - i know the material the bellhousing is cast from is near impossible to weld)

Ned.

Araldite!!!

Bet you could araldite it.

Ed.
P.S. also a less than serious suggestion.

That's expensive!
I got mine for £25 less from the manufacturer...

£25 less? please tell us where! i paid £160 odd for mine new which I thought was a reasonable price at the time!!

cheers,

Ned.

Stuart, no you didnt, i DID,

the ones me and Stuart have are from A frame engineering in Barrowford Lancs,
so quality is 1st class.
Ring him
Mick on
01282 690184, tell him i sent you so you should get discount.

HTH Mitch

[Edited on 23/2/06 by mitch2b]

[Edited on 23/3/06 by mitch2b]

That's what I meant, Mitch...

Minus your handling fee of course

Got mine from A frame. Very happy with it but you do need socket headed cap screws (allen bolts) for attaching it to the gearbox. They are 12mm 1.5 pitch and were a bit of a pig for me to get locally. But it's fitted and I'm happy with it and
A Frame are recomended by me as well now.