macspeedy
|
| posted on 12/3/09 at 10:14 AM |
|
|
ZX12 itg airfilter fitting
How have you guys done it as it looks like i'll have to make spacers to space the back plate away from the fuel rail.
|
|
|
|
|
mcerd1
|
| posted on 12/3/09 at 10:33 AM |
|
|
have you got any pics ?
I'm using part of the bike airbox to make the connection to my ZX9R carbs - maybe you could do something similar :?
also I've got an ITG JC40 backplate I can measure and I can turn up spacers for you if needed
|
|
|
macspeedy
|
| posted on 12/3/09 at 10:52 AM |
|
|
we have a lathe etc, i was just curious as to what other folk have done.
|
|
|
Hellfire
|
| posted on 12/3/09 at 12:13 PM |
|
|
Do you have the original ZX12R ram pipes? If so, the ram pipes can be bolted to the backplate and the backplate and filter push fitted. This should
give it plenty of clearance from the fuel rail.
Phil
[Edited on 12-3-09 by Hellfire]
|
|
|
macspeedy
|
| posted on 12/3/09 at 12:29 PM |
|
|
thanks Phil, we do have the original pipes.
Thanks
Graham
|
|
|
Hellfire
|
| posted on 12/3/09 at 12:47 PM |
|
|
Like this;
Which should easily clear the fuel rail, like this;
Phil
[Edited on 12-3-09 by Hellfire]
|
|
|
eddbaz
|
| posted on 12/3/09 at 02:19 PM |
|
|
I did mine exactly the same way as Phil, in fact I copied his
|
|
|
macspeedy
|
| posted on 12/3/09 at 03:06 PM |
|
|
Ah, yeah i saw those pics just havnt got around to trying with the trumpets yet, Phil, how did you get the spacing right?
Cheers
Graham
|
|
|
Hellfire
|
| posted on 12/3/09 at 05:31 PM |
|
|
I knew this photo would come in useful one day
Phil
[img][/img]
|
|
|
macspeedy
|
| posted on 13/3/09 at 06:05 PM |
|
|
Great thanks
|
|
|
