Winston Todge
|
| posted on 14/3/09 at 10:55 AM |
|
|
R1 carbed emissions?
Just getting my car ready for SVA now...
Where's the best place to start in terms of a base setting for fuelling?
Has anyone got any piccies of which mixture screws to set?
And also the fail points for the test?
Thanks for any pointers!
|
|
|
|
|
StevieB
|
| posted on 19/3/09 at 06:12 PM |
|
|
Something I'm very interested in peoples opinions on too...
|
|
|
easisatman
|
| posted on 19/3/09 at 09:40 PM |
|
|
Carbed r1 engine
Hi winston
the haynes workshop manual for the yamaha R1 has some good pics and info for the carbs i got mine from Halfords
also i purcahased a carb tune balancing tool to balance the carbs good tool!
regards
Paul
|
|
|
adithorp
|
| posted on 20/3/09 at 12:16 PM |
|
|
Assuming your engine is post '95...
Fast idle test (2500-3000 revs)
CO less than 0.3%
HC less than 200ppm
Lambda between 0.97 and 1.03
Natural idle test
CO below 0.5%
Yamaha workshop manuals are available here...
http://yzf-r1forum.net/
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
Winston Todge
|
| posted on 24/3/09 at 06:06 PM |
|
|
Thanks for the replies guys!
Got it booked in on Saturday to set it up properly. Will have a play then!
Thanks again,
Chris.
|
|
|
