Tidy_Andy
|
posted on 28/2/04 at 07:32 PM |
|
|
R1 loom
has anyone had any experiance removing the R1's optional imobiliser? my mate is building a rear wheel drive mini and even with the wiring
diagram its got us confused.
|
|
|
jimgiblett
|
posted on 28/2/04 at 08:02 PM |
|
|
Hi Andy,
Get yourself a copy of the Haynes manual and look at the us spec wiring diagram as this is the same as the european model but without the cycle lock.
All should then be quite a bit clearer.
Cheers
Jim
|
|
OX
|
posted on 29/2/04 at 01:53 AM |
|
|
the black wire from the cdi goes to earth and the black wire from the big relay box with the white plug also goes to earth .
|
|