subk2002
|
| posted on 12/3/04 at 05:27 PM |
|
|
R1 loom in kit???
Hi guys has enyone wired up there full kit with a bike loom if so whats the pros and cons of it all ??
Im using the bike clocks (R1)
Im hopeing to just extend the wires for the lights etc.
Cheers Drew
|
|
|
|
|
Mk-Ninja
|
| posted on 12/3/04 at 08:38 PM |
|
|
Ive used the bike loom as the base and grafted the hazards etc onto it, youve got me thinking about the horn might have to change a wire about there
but its alot simpler than the car loom and in the end all youve got is a bike with 4 wheels anyway.
I'm sure I've got one, just don't know where I've put it
|
|
|
OX
|
| posted on 12/3/04 at 08:57 PM |
|
|
iv done the same as MK-ninja,but i only wired it so that the hazzards work whilst the ignition was off ,i didnt know the side lights and horn did as
well,they musy of missed that on the sva test
|
|
|
Hellfire
|
| posted on 12/3/04 at 10:30 PM |
|
|
Loom
I've used the basic bike loom - removed lighting/horn etc and made my own. Pretty much easy... even easier with a premier or greene one - so
I'm told 
On issue with sidelights and horn - I've wired them through ignition too. Wouldn't want any Tom, Dick or Harry turning them on as they
walked past! Or should I re-visit that one... will check SVA Manuél...
|
|
|
