twybrow
|
| posted on 19/1/10 at 09:48 AM |
|
|
ZX12 Engine Mounts
Can anyone confirm that the 2000-2001 ZX12R uses the same engine mounts as the later models? Ie will an engine cradle from one year fit both?
Thanks chaps and chapesses.
|
|
|
|
|
minitici
|
| posted on 19/1/10 at 09:50 AM |
|
|
I think the early ZX12R used two front mounts and the later used a single central front mount.
|
|
|
eznfrank
|
| posted on 19/1/10 at 09:56 AM |
|
|
Above is correct
|
|
|
yorkshire-engines
|
| posted on 19/1/10 at 05:26 PM |
|
|
Hi the a series zx12 2000 2001 are same rear mounts as the b series 2002 onwards the front mounts are different early ones have 2 mounts above 1
and 4 exhaust port the later have a single above 2 and 3 ports but BEWARE kawasaki are always registering early bikes on late reg numbers so
always check engine not year of bike iv had 05 reg bikes that were really 00/01 reg with 00/01 engines in them
cheers malc
|
|
|
Hellfire
|
| posted on 20/1/10 at 08:02 PM |
|
|
Malc,
are you sure they're 00/01 engines in 2005 frames? I thought they changed the ZX12R front mounts back to the original twin configuration in
2005.
Phil
|
|
|
rf900rush
|
| posted on 21/1/10 at 07:14 AM |
|
|
I used a 00/01 front mount frame on my B model zx12 I just think the thread size was different,
|
|
|
