jossey
|
| posted on 16/6/10 at 11:24 AM |
|
|
should i get torque tube with PROP????
Just spoke with dunning.
they gave me ideas.
they said it will bolt straight onto my motorbike gearbox 11/40 series?
that right?
i thought i need a sprocket adaptor
[Edited on 16/6/10 by jossey]
[Edited on 16/6/10 by jossey]
[Edited on 16/6/10 by jossey]
|
|
|
|
|
coozer
|
| posted on 16/6/10 at 11:53 AM |
|
|
Put the diff in the car..
Dunning & Fairbank for the prop.
1972 V8 Jago
1980 Z750
|
|
|
daviep
|
| posted on 16/6/10 at 11:59 AM |
|
|
That oil seal doesn't look quite right, what's going on at the 7 o'clock position?
Davie
|
|
|
coozer
|
| posted on 16/6/10 at 12:15 PM |
|
|
Its a cloth or summit innit???
1972 V8 Jago
1980 Z750
|
|
|
jossey
|
| posted on 16/6/10 at 12:38 PM |
|
|
yes its a cloth and the rubber is just moved due to stuffing the cloth in. its fine though.
who shall i get my prop from?
|
|
|
Dangle_kt
|
| posted on 16/6/10 at 01:29 PM |
|
|
quote:
Originally posted by coozer
Dunning & Fairbank for the prop.
x2 thin paint, but the rest is great quality.
|
|
|
Bluemoon
|
| posted on 16/6/10 at 02:25 PM |
|
|
Not sure what you mean by torque tube, I assume you mean the "prop" torque tube tends to refer to a tube around the prop it self, a method
used by ford and some others, the early 7's used this setup.
In this case the stationary torque tube holds gearbox and diff (or gearbox) together, not needing chassis to transfer the torque, neat idea...
i.e:
Dan
[Edited on 16/6/10 by Bluemoon]
|
|
|
franky
|
| posted on 16/6/10 at 02:30 PM |
|
|
yep get one, the torque resiliant tube acts like a rubber cush drive in the bikes wheel helping to protect the gearbox.
|
|
|
BenB
|
| posted on 16/6/10 at 03:28 PM |
|
|
I've got one on mine. Mostly because it's got the gearbox outlet attached to the end of it so I just had it chopped it half then wacked up
the chuff of a cut-down prop (after a little turning on a lathe) and welding in place.
|
|
|
jase380
|
| posted on 16/6/10 at 06:24 PM |
|
|
you still need to get a sprocket / prop adaptor, it wont bolt onto a sprocket !!
|
|
|
jossey
|
| posted on 17/6/10 at 02:41 PM |
|
|
thanks again guys!
cheers
dave
|
|
|
