ko_racer
|
| posted on 2/7/10 at 10:07 AM |
|
|
R1 Bike Fuel Pump in Swirl Pot
I don't suppose anyone has a picture of a r1 Injection bike ump mounted in their swirl pot.
I'm looking to change the swirl pot on mine and can't think of an easy way to do this without putting athick plate on the base and tapping
it for the screws.
I also need to find somewhere to get the quick release connectors from as I want to fit these to some braided line. I can't see that the bike
ones are re-usable so need to source some new ones if possible.
Thanks
Keith
|
|
|
|
|
cloudy
|
| posted on 2/7/10 at 10:17 AM |
|
|
The original ones are reusable, at least on the 5VY, just cut along the hose lengthways, and it'll come off - careful not to damage the plastic
barb inside...
James
www.warnercars.com
|
|
|
lsdweb
|
| posted on 2/7/10 at 03:14 PM |
|
|
I have the R1 pump mounted in the base of the fuel tank for my Westfield - the tank is tiny and not a lot bigger than a swirl pot!
This picture doesn't help much but there is a flange welded into the base to which the pump bolts - I can post a pic of that if you
wish?.JPG)
|
|
|
