sdh2903
|
| posted on 1/4/11 at 08:35 AM |
|
|
Anyone got a 4xv R1 wiring diagram?
Hi all
As above, I already have the service manual one but its not the clearest to follow. Anyon got a better one?
cheers
Steve
|
|
|
|
|
minitici
|
| posted on 1/4/11 at 09:07 AM |
|
|
The official manual is pretty good...
Not much to the wiring on the 4XV as it does not have the complexity of an injection system.
Individual circuits are also detailed within the manual.
As always, the actual loom can look a lot different to the wiring diagram especially where there are common wires and lots of hidden connections.
|
|
|
sdh2903
|
| posted on 1/4/11 at 09:17 AM |
|
|
Granted its not very complex, but it will be if i chop the wrong wire.
There are some cracking colour one sheet wiring diagrams for the later models just wondered if anyone had one for the 4xv.
|
|
|
A1
|
| posted on 1/4/11 at 11:36 AM |
|
|
what you wanting to do?
the haynes ones okay
|
|
|
sdh2903
|
| posted on 1/4/11 at 11:46 AM |
|
|
I'm mainly stripping out the unneccessary lighting circuits etc to just have an engine loom, I will have a look at the haynes and see if its
better than the workshop one.
cheers
Steve
|
|
|
mad-butcher
|
| posted on 1/4/11 at 12:56 PM |
|
|
I blew the one in the pdf Yamaha service manual up in sections printed it off and then taped them together, now have a diagram that's about 1
metre wide
|
|
|
CRAIGR
|
| posted on 1/4/11 at 07:58 PM |
|
|
http://dsr.racer.net/engines/yamaha_yzfr1.htm
|
|
|
