shortie
|
| posted on 15/7/04 at 09:26 PM |
|
|
HELP!! Blade HT leads
Guys,
Just taken apart the HT leads for my blade but being an idiot I forgot to note which lead went to which connector on the first coil!
How do I tell which lead goes to which coil connector when I refit them??
thanks,
Rich.
|
|
|
|
|
colibriman
|
| posted on 15/7/04 at 10:01 PM |
|
|
no.1 plug goes opposite yellow/blue
no.2 goes opposite blue /yellow
no.3 goes opposite black/white
and
no.4 goes opposite other black/white
have fun..........
cheers
colin
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
colibriman
|
| posted on 15/7/04 at 10:02 PM |
|
|
no, shit.....what model u got...oops...
that is for up to rrs models....
[Edited on 15/7/04 by colibriman]
[Edited on 15/7/04 by colibriman]
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
shortie
|
| posted on 15/7/04 at 10:07 PM |
|
|
RRR so that should be fine, ta.
Rich.
|
|
|
colibriman
|
| posted on 15/7/04 at 10:09 PM |
|
|
no problem.....
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Alez
|
| posted on 16/7/04 at 09:44 AM |
|
|
Image deleted by owner
Not sure if it's the same for all models, this is from a '97
Cheers.
|
|
|
ChrisGamlin
|
| posted on 16/7/04 at 08:17 PM |
|
|
Later engines are a different way round on the wire colouring, as I found out when wiring up a mate's 93 blade engine the same as my 99 engine
and producing a moosiv backfire when trying to first start it, without any silencer on 
|
|
|
colibriman
|
| posted on 16/7/04 at 08:19 PM |
|
|
i spotted that last night when i was checking the haynes....i did wonder what would happen.....
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
ChrisGamlin
|
| posted on 16/7/04 at 09:38 PM |
|
|
Backfire, lots of backfire! 
|
|
|
