subk2002
|
| posted on 20/7/04 at 10:57 PM |
|
|
Fitting R1 air box??
Im going to fit the R1 air box i was wondering the bast way to do it i have the bulge in the bonnet any tips would be great.
Cheers Drew
[Edited on 20/7/04 by subk2002]
|
|
|
|
|
Jasalarms
|
| posted on 21/7/04 at 10:52 PM |
|
|
Hi Drew,
Check out my archive, i think there is a couple of pics
|
|
|
subk2002
|
| posted on 22/7/04 at 10:43 AM |
|
|
So you just turned it round did you have to cut the holes to get them to fit and how did you get it to seal back up?
|
|
|
j30fos
|
| posted on 22/7/04 at 11:31 AM |
|
|
Nope all you do is cut out all 4 holes as 1 piece, turn the airbox 180o and glue/bolt back into place.
A quick note also, make a small bracket to the chassis where the mounting hole is. I didn't and when mine got wrote off the airbox and carbs
flew off the engine.
Jas the car is looking very nice
John
|
|
|
Jasalarms
|
| posted on 22/7/04 at 12:01 PM |
|
|
Thanks John 
Drew, i did cheat a bit as i had a spare airbox to play with
I used the same stuff to bond the airbox parts together as i used on the floor of the chassis, tiger seal polyurethane.
Any plans of another build John?
|
|
|
subk2002
|
| posted on 22/7/04 at 04:12 PM |
|
|
Thanks guys i will have a go.
Wish me luck
|
|
|
j30fos
|
| posted on 23/7/04 at 08:36 AM |
|
|
Jas have a look in my photo section there is a new folder :-)))) its coming. Its got a charging fault but I cant wait to see how it handles.
|
|
|
subk2002
|
| posted on 23/7/04 at 01:34 PM |
|
|
That looks nice
Is that your new toy then?
|
|
|
Jasalarms
|
| posted on 24/7/04 at 06:14 AM |
|
|
Yummy!!!
Plenty of on-track fun 4 U then John .......
.......and lots on the road
|
|
|
Jasalarms
|
| posted on 24/7/04 at 06:24 AM |
|
|
Drew, looked for the rubber seals, but i remember now the reason i used the original airbox bottom as the new airbox didnt have the seals with it,
sorry mate! 
Ive got a airbox top half spare!
|
|
|
