pauladamss
|
| posted on 28/2/12 at 05:10 PM |
|
|
gsxr clutch
When i got my engine it had no sprocket cover so i have no idea how the clutch cable is attached do i need to get a sprocket cover and if not what do
i need to connect the cable to the clutch rod????
|
|
|
|
|
Rogthebandit
|
| posted on 28/2/12 at 06:13 PM |
|
|
Hi
Depends really if your running a cable or wanting it to be hydraulic? I am running a clutch cable on the original sprocket cover. I machined out a
whole to suit the adapter for the prop. Looks and works a treat. You need the k6 cover that has the clutch lever sticking out the top
[Edited on 28/2/12 by Rogthebandit]
|
|
|
pauladamss
|
| posted on 28/2/12 at 06:42 PM |
|
|
Going to run a cable, is that a k6 on or just the k6
|
|
|
Rogthebandit
|
| posted on 28/2/12 at 08:45 PM |
|
|
The k6 1000 is cable. The k7 1000 onwards are hyd I think. The 600/750s onwards are cable. Not sure if they fit the 1000. What year is your engine?
|
|
|
pauladamss
|
| posted on 28/2/12 at 09:00 PM |
|
|
Its a k4 there seems to be three different types on ebay
|
|
|
Rogthebandit
|
| posted on 28/2/12 at 09:13 PM |
|
|
There's a k4 cover on eBay. That's a hyd cylinder type. The bolt holes look very similar to the k6 covers. If ya measure the hole centres
on the 4 fixings on ur engine then I can compare to mine and see if there the same.
|
|
|
pauladamss
|
| posted on 28/2/12 at 09:23 PM |
|
|
Ok cheers i will measure it up tomorrow thanks
|
|
|
Rogthebandit
|
| posted on 29/2/12 at 06:49 PM |
|
|
How do, I have measured the bolt centres. I would upload a diagram but I havent sussed how to do that yet so I will described it instead. Hopefully
it's clear for ya. There's 4 bolts holding the cover on. Starting at the bolt closest to the gear selector (lowest bolt), call it bolt 1.
Going clockwise the centres are:
1 to 2 is 81.5mm
2 to 3 is 91.6mm
3 to 4 is 72.5mm
4 to 1 is 178mm
Give or take a mm or 2
Hope this helps
|
|
|
pauladamss
|
| posted on 29/2/12 at 07:39 PM |
|
|
Cheers for that i will go and have a measure up.
|
|
|
pauladamss
|
| posted on 3/3/12 at 06:33 PM |
|
|
Looks like it should fit now all i need to do if find one seem to be about as rare as a k4 clock loom. Many thanks for doing that.
|
|
|
